DLR series
Thin dual lock chuck
Dual lock chuck with high gripping accuracy, lightweight and low inertia
DLR series
- 2-step gripping of parallel gripping and pull-lock gripping afterwards ensures workpiece seating without lifting
- High gripping accuracy of 0.01mm T.I.R.
- Lightweight and low inertia body
- Thin body provides a wide processing area
- High speed rotation with small gripping force is ideal for workpieces that are easily distorted, such as thin workpieces
- Pull-down amount can be adjusted while attached on the lathe
- Tnut-Plus can be used (option)
- Dedicated for outer diameter gripping
*CE correspondence
Product Specifications
| Model | DLR08 | ||
|---|---|---|---|
| Through-hole (mm) | 52 | ||
| Gripping Range (at OD Gripping with Standard Soft Jaws) (mm) | Max. | 203 | |
| Min. | 19 | ||
| Jaw Stroke (Diameter) (mm) | 5.5 | ||
| Plunger Stroke (mm) | 12 | ||
| Max. Draw Bar Pull Force (kN) | 24 | ||
| Max. Static Gripping Force (kN) | 60 | ||
| Max. Speed (min-1) | 5000 | ||
| Dynamic Gripping Force at Max. Speed (kN) | 20 | ||
| Moment of Inertia (kg・m2) | 0.095 | ||
| Thickness (mm) | 87 | ||
| Net Weight (kg) (with Standard Soft Jaws) | 17.2 | ||
| Matching Cylinder | SR1453C SS1453K S1552 | ||
| Standard Soft Jaws | SJ06B1 | ||
| Tnut-Plus (Option) | TN06PLUS | ||
| Outline Drawing | 2D |  | |
| TIF |  | ||
| DXF |  | ||
| DWG |  | ||
| 3D | Parasolid |  | |
| STEP |  | ||
Note) The 3D data includes two types of the positions of the jaws for both Parasolid and STEP: open end (UC) and closed end (OC).
