GT series

High clamping torque NC rotary table

NC rotary table suitable for heavy machining
The very strong clamping torque was achieved by increased piston area and new clamping mechanism.
High clamping torque and rigid body allows heavy machining and shorter tact time.
Built-in rotary joint available

*CE correspondence

Model			GT200	GT250	GT320
Right-handed Type			○	○	○
Left-handed Type			○	○	○
Table Diameter (mm)			ø200	ø250	ø320
Centre Hole Diameter (mm)			ø65H7	ø100H7	ø130H7
Through Hole Diameter (mm)			ø45	ø70	ø105
Centre Height (mm)			140	180	225
Clamping Torque (N･m) (at 0.5 MPa)			820	1600	2800
Motor Axis Reduced Inertia (kg･m²)			0.00023	0.00036	0.00039
Servomotor (for Fanuc spec.)			αiF 4/5000-B	αiF 4/5000-B	αiF 8/3000-B
Total Reduction Ratio			1/72	1/90	1/120
Max. Rotation Speed (min^-1)		4th axis spec. (Fanuc spec.)	41.6 (at motor 3000min^-1)	33.3 (at motor 3000min^-1)	25 (at motor 3000min^-1)
Max. Rotation Speed (min^-1)		M signal spec.	41.6 (at motor 3000min^-1)	33.3 (at motor 3000min^-1)	16.6 (at motor 2000min^-1)
Allowable Work Inertia (kg･m²)			1.00	1.95	4.49
Indexing Accuracy (sec)			20	20	20
Repeatability (sec)			4	4	4
Mass of Product (kg)			65	87	145
Allowable Load		<!-- -->Horizontal (kg)	200	250	350
Allowable Load		<!-- -->Vertical (kg)	100	125	180
Manual Tailstock (as an option)			MR200RN	MR250RN	MR320RN
Tail Spindle (as an option)			MSR142A/TSR142A	MSR181A/TSR181A	TSR181A45
Rotary Joint (as an option)			RJ40H20J01 Hydraulic/Pneumatic 4 ports	RJ70H25J01 Hydraulic/Pneumatic 6 ports	RJ70H32J01 Hydraulic/Pneumatic 6 ports
Outline Drawing	Kitagawa Own Controller Spec.	2D



		3D
		3D
	4th axis spec. (Fanuc spec.)	3D
	4th axis spec. (Fanuc spec.)	3D
Option Outline Drawing			Tailstock \| Tail Spindle

MR series