V75V series
5-axis centering vise
The most suitable for 5-axis machining center
V75V series
- Large gripping force upto 20kN (Note 1)
- Gripping the bottom of work with only 3.5 mm depth and machining 5 faces
- The low body provides a large machining area and a good tool accessibility.
- Hardened body realizes high durability
- Roughing and finishing can be done with one unit (Note 2)
- High repeatability of ± 0.01 mm (Note 3)
(Note 1) Please prepare a torque wrench and a wrench socket separately.
(Note 2) At using optional combination hard jaws
(Note 3) When tightened at the ground surfaces of the optional combination jaws without using parallel plates
Product Specifications
| Model | Max. input torque (N・m) | Max. gripping force (kN) | Jaw stroke (mm) (At using the standard equipped grip jaws) | Mass (kg) |
|---|---|---|---|---|
| V75V13C | 100 | 20 | 3.8 - 117 | 3.0 |
| V75V17C | 100 | 20 | 3.8 - 157 | 3.6 |
Jaw stroke
| Model | Grip jaw | Flat jaw | Combination jaw | |||
|---|---|---|---|---|---|---|
| S1 (mm) | S2 (mm) | S3 (mm) | S4 (mm) | S5 (mm) | S6 (mm) | |
| V75V13C | 3.8 - 60.6 | 59 - 117 | 5 - 61.8 | 60.2 - 118.2 | 0[12] - 56.8 | 55.2 - 113.2 |
| V75V17C | 3.8 - 100.6 | 59 - 157 | 5 - 101.8 | 60.2 - 158.2 | 0[12] - 96.8 | 55.2 - 153.2 |
Note 1) The jaw stroke of the standard grip jaw is the grip tip position.
Note 2) The jaw stroke of the combination jaw is between flat surfaces. The gripping range at the tip of the grip is the same as the standard grip jaw.
Note 3) The values in [ ] are for when a parallel plate is used.
Option
Refer to the instruction manual for how to use.
Drwings download
| Model | 2D | 3D | ||
|---|---|---|---|---|
| V75V13C |  |  |  |  |
| V75V17C | | | | |
| Flat jaw (Option) | | | | |
| Combination jaw (Option) | | | | |
| Parallel plate (Option) | | | | |
Note) The 3D data of V75V13C and V75V17C include two drawings of the open end (O) and the closed end (C) with standard grip jaws for both Parasolid and STEP.
