PWS06
Power Wing Work Gripper
Suitable for 3 to 5-Axis machines
Cost reduction achieved by built-in Cylinder
PWS06
- Stationary clamping by pull back the workpiece
- Cost reduction achieved by built-in cylinder
- Available on the standard column of machine
- Available to be mounted on NC Rotary Table
- By using the optional lock valve unit, it is possible to remove the piping during machining.
Product Specifications
| Model | PWS06 | |||
|---|---|---|---|---|
| Jaw Stroke (Diameter) (mm) | 7.7 | |||
| Gripping Force (kN) | at Pneumatic 0.6 Mpa | 19 | ||
| at Hydraulic 1.3 Mpa | 53 | |||
| Max. Pressure (MPa) | Pneumatic | 0.7 | ||
| Hydraulic | 1.3 | |||
| Min. Presssure (MPa) | 0.2 | |||
| Gripping Diameter (mm) | Outer Diameter Gripping | Max. | 120 | |
| Min. | 13 | |||
| Inner Diameter Gripping | Max. | 160 | ||
| Min. | 70 | |||
| Net Weight (kg) (with Soft Top Jaws) | 24 | |||
| Outline Drawing | 2D |  | ||
| DXF |  | |||
| DWG |  | |||
| 3D | External Gripping | Parasolid |  | |
| STEP |  | |||
| Internal Gripping | Parasolid | | ||
| STEP | | |||
Note) Each 3D data includes three types of the positions of the jaws for both Parasolid and STEP: open end, closed end and clamping position.
