PUES06
Internal Pull Lock Work Gripper
Suitable for 3 to 5-Axis machines
Cost reduction achieved by built-in Cylinder
PUES06
- Pull back and clamping the inner diameter of workpiece
- Cost reduction achieved by built-in Cylinder
- Available on the standard column of machine
- Available to be mounted on NC Rotary Table
- By using the optional lock valve unit, it is possible to remove the piping during machining.
Product Specifications
| Model | PUES06 | |
|---|---|---|
| Jaw Stroke (Diameter) (mm) | 4.8 | |
| Gripping Force (kN) | at Pneumatic 0.6 Mpa | 20 |
| at Hydraulic 1.3 Mpa | 57 | |
| Max. Pressure (MPa) | Pneumatic | 0.7 |
| Hydraulic | 1.3 | |
| Min. Presssure (MPa) | 0.2 | |
| Gripping Diameter (mm) | Standard Jaws | 70 ～ 87 |
| Option Jaws | 89 ～ 108 | |
| Master Jaw Gripping | 44 ～ 70 | |
| Net Weight (kg) (with Soft Top Jaws) | 21 | |
| Outline Drawing |  | |
| DXF |  | |
| DWG |  | |
| Parasolid |  | |
| STEP |  | |
Note) Each 3D data includes three types of the positions of the jaws for both Parasolid and STEP: open end, closed end and clamping position).
