MRT200
Top motor type NC rotary table
Suitable both horizontal and vertical machining centres
MRT200
- Top mounted motor position allows optimal stroke for Y-axis
- Less interference
- Compact design with pneumatic clamping system
- Built-in rotary joint available
*CE correspondence
Product Specifications
| Model | MRT200 | ||
|---|---|---|---|
| Table Diameter (mm) | ø202 | ||
| Centre Hole Diameter (mm) | ø65H7 | ||
| Through Hole Diameter (mm) | ø45 | ||
| Centre Height (mm) | 140 | ||
| Clamping Method | Pneumatic | ||
| Clamping Torque (Nï½¥m) (at 0.5 MPa) | 350 | ||
| Motor Axis Reduced Inertia (kgï½¥m2) | 0.00017 | ||
| Servomotor (for Fanuc spec.) | αiF 4/5000-B | ||
| Total Reduction Ratio | 1/90 | ||
| Max. Rotation Speed (min-1) | 33.3 (at motor 3000min-1) | ||
| Allowable Work Inertia (kgï½¥m2) | 1.00 | ||
| Indexing Accuracy (sec) | 20 | ||
| Repeatability (sec) | 4 | ||
| Mass of Product (kg) | 70 | ||
| Allowable Load | Horizontal (kg) | - | |
| Vertical (kg) | 100 | ||
| Manual Tailstock (as an option) | MR200RN | ||
| Tail Spindle (as an option) | MSR142A/TSR142A | ||
| Rotary Joint (as an option) | RJ40H20Q02 Hydraulic/Pneumatic 4 ports | ||
| Outline Drawing | Kitagawa Own Controller Spec. | 2D |  |
 | |||
 | |||
 | |||
| 3D |  | ||
 | |||
| 4th axis spec. (FANUC spec.) | 3D | | |
| |||
| Option Outline Drawing | Tailstock | Tail Spindle | ||
