TP series
Mega through-hole NC rotary table
Suitable for machining large work pieces
TP series
- Suitable for machining large workpieces such as oil pipes
- High accuracy heavy duty machining
- Lightweight and compact design
*CE correspondence
Product Specifications
| Model | TP430 | TP530 | ||
|---|---|---|---|---|
| Right-handed Type | â—‹ | â—‹ | ||
| Left-handed Type | Order production | Order production | ||
| Table Diameter (mm) | ø430 | ø530 | ||
| Centre Hole Diameter (mm) | ø300H7 | ø400H7 | ||
| Through Hole Diameter (mm) | ø275 | ø345 | ||
| Centre Height (mm) | 280 | 310 | ||
| Clamping Method | Air-Hydraulic/Hydraulic | Air-Hydraulic/Hydraulic | ||
| Clamping Torque (Nï½¥m) (at pneumatic 0.45MPa /hydraulic 3.5MPa) | 4000 | 6100 | ||
| Motor Axis Reduced Inertia (kgï½¥m2) | 0.0025 | 0.0025 | ||
| Total Reduction Ratio | 1/120 | 1/180 | ||
| Max. Rotation Speed (min-1) | 4th axis spec. (Fanuc spec.) | 16.6 (at motor 2000min-1) | 11.1 (at motor 2000min-1) | |
| M signal spec. | 16.6 (at motor 2000min-1) | 8.33 (at motor 1500min-1) | ||
| Allowable Work Inertia (kgï½¥m2) | 5.78 | 12.29 | ||
| Indexing Accuracy (sec) | 20 | 20 | ||
| Repeatability (sec) | 4 | 4 | ||
| Mass of Product (kg) | 276 | 350 | ||
| Allowable Load | Vertical (kg) | 250 | 350 | |
| Manual Tailstock (as an option) | - | TS500RN | ||
| Tail Spindle (as an option) | Order production | Order production | ||
| Rotary Joint (as an option) | Order production | Order production | ||
| Outline Drawing | Kitagawa own controller spec. | 2D |  | |
 | | |||
 | | |||
| 3D |  | | ||
 | | |||
| 4th axis spec. (Fanuc spec.) | 3D | | | |
| | |||
| Option Outline Drawing | - | Tailstock | ||
