RS100
Simplified type
Maximum speed: 83.3min-1
RS100
- High speed table for machining small work pieces
- With exclusive controller
- Simple design
- Lightweight & compact
Product Specifications
| Model | RS100 | ||
|---|---|---|---|
| Right-handed Type | â—‹ | ||
| Left-handed Type | â—‹ | ||
| Table Diameter (mm) | ø105 | ||
| Centre Hole Diameter (mm) | ø50H7 | ||
| Through Hole Diameter (mm) | ø32 | ||
| Centre Height (mm) | 110 | ||
| Clamping Method | Pneumatic | ||
| Clamping Torque (Nï½¥m) (at 0.5 MPa) | 80 | ||
| Total Reduction Ratio | 1/36 | ||
| Max. Rotation Speed(min-1) (at motor 3000min-1) | 83.3 | ||
| Allowable Work Inertia (kgï½¥m2) | 0.054 | ||
| Indexing Accuracy (sec) | 50 | ||
| Repeatability (sec) | 10 | ||
| Mass of Product (kg) | 23 | ||
| Allowable Load | Horizontal (kg) | 60 | |
| Vertical (kg) | 30 | ||
| Manual Tailstock (as an option) | RS100RN | RS100LN | |
| Outline Drawing (Kitagawa own controller spec.) |  |  | |
| TIF | | | |
| DXF | | | |
| DWG | | | |
| Option Outline Drawing | Tailstock | ||
- This model is for only M signal spec., and it is not provided for the 4th axis specifications.
