CK(R) series
Ultra compact NC rotary table
The world’s thinnest body
CK(R) series
- Ultra compact body and smallest footprint NC rotary table
- Suitable for using with trunnion jig
- Block-less rotary joint (CKR160 and CKR200)
- Suitable for small footprint machining centres
*CE correspondence
Product Specifications
| Model | CK160 | CKR160 | |||
|---|---|---|---|---|---|
| Right-handed type | â—‹ | â—‹ | |||
| Left-handed type | â—‹ | â—‹ | |||
| Table Diameter (mm) | ø114 | ø114 | |||
| Centre Hole Diameter (mm) | ø65H7 | ø65H7 | |||
| Through Hole Diameter (mm) | ø65 | - | |||
| Centre Height (mm) | 140 | 140 | |||
| Clamping Method | Pneumatic | Pneumatic | |||
| Clamping Torque (Nï½¥m) (at 0.5 MPa) | 340 | 340 | |||
| Motor Axis Reduction Inertia (kgï½¥m2) | 0.00009 | 0.00009 | |||
| Servomotor (for Fanuc spec.) | αiF 2/5000-B | αiF 2/5000-B | |||
| Total Reduction Ratio | 1/72 | 1/72 | |||
| Max. Rotation Speed (min-1) | 41.6 (at motor 3000min-1) | 41.6 (at motor 3000min-1) | |||
| Allowable Work Inertia (kgï½¥m2) | 0.51 | 0.51 | |||
| Indexing Accuracy (sec) | 20 | 20 | |||
| Repeatability (sec) | 4 | 4 | |||
| Mass of Product (kg) | 40 | 41 | |||
| Allowable Load | Horizontal (kg) | 160 | 160 | ||
| Vertical (kg) | 80 | 80 | |||
| Tail Spindle (as an option) | MSRC140/TSRC140 MSR142A/TSR142A | MSRC140/TSRC140 MSR142A/TSR142A | |||
| Rotary Joint (as an option) | - | Hydraulic/Pneumatic 7 ports Note 1) | |||
| Outline Drawing | Kitagawa Own Controller Spec. | 2D |   | | |
| TIF | | | |||
| DXF | | | |||
| DWG | | | |||
| 3D | Parasolid | | | ||
| STEP | | | |||
| 4th axis spec. (Fanuc spec.) | 3D | Parasolid | | | |
| STEP | | | |||
| Option Outline Drawing | Tail Spindle | ||||
| Model | CK200 | CKR200 | |||
|---|---|---|---|---|---|
| Right-handed type | â—‹ | â—‹ | |||
| Left-handed type | â—‹ | â—‹ | |||
| Table Diameter (mm) | ø130 | ø130 | |||
| Centre Hole Diameter (mm) | ø65H7 | ø65H7 | |||
| Through Hole Diameter (mm) | ø65 | - | |||
| Centre Height (mm) | 150 | 150 | |||
| Clamping Method | Pneumatic | Pneumatic | |||
| Clamping Torque (Nï½¥m) (at 0.5 MPa) | 400 | 400 | |||
| Motor Axis Reduced Inertia (kgï½¥m2) | 0.00017 | 0.00017 | |||
| Servomotor (for Fanuc spec.) | αiF 2/5000-B | αiF 2/5000-B | |||
| Total Reduction Ratio | 1/120 | 1/120 | |||
| Max. Rotation Speed (min-1) | 25 (at motor 3000min-1) | 25 (at motor 3000min-1) | |||
| Allowable Work Inertia (kgï½¥m2) | 1.00 | 1.00 | |||
| Indexing Accuracy (sec) | 20 | 20 | |||
| Repeatability (sec) | 4 | 4 | |||
| Mass of Product (kg) | 47 | 49 | |||
| Allowable Load | Horizontal (kg) | 160 | 160 | ||
| Vertical (kg) | 80 | 80 | |||
| Tail Spindle (as an option) | MSRC150/TSRC150 | MSRC150/TSRC150 | |||
| Rotary Joint (as an option) | - | Hydraulic/Pneumatic 8 ports Note 1) | |||
| Outline Drawing | Kitagawa Own Controller Spec. | 2D |  | | |
| TIF |  | | |||
| DXF |  | | |||
| DWG |  | | |||
| 3D | Parasolid | | | ||
| STEP | | | |||
| 4th axis (Fanuc spec.) | 3D | Parasolid | | | |
| STEP | | | |||
| Option Outline Drawing | Tail Spindle | ||||
Note 1) All ports are available for both pneumatic and hydraulic, not available for coolant.
Note 2) Please consult Kitagawa distributor for Tail stocks.
All data and specifications are subject to change without notice. Please consult us for the latest details, technical data and/or specifications to confirm requirements.
