IDEAL FOR 3 TO 5-AXIS MACHINES
Three-jaw power wing work grippers secure the workpiece by pulling back and locking into place.
Suitable for rough machining, OP-10 or OP-20.
View the PUES06 inner diameter pull lock work gripper – locks the workpiece in place by pulling back and clamping the inner diameter. Suitable for finish machining with high accuracy performance.
SPECIAL FEATURES
- Built-in cylinder drastically saves costs – no need for a separate actuator
- Compact and easy to install on standard column of the machine – total height is greatly reduced with a built-in cylinder.
- Can be mounted on an NC Rotary Table
- Versatile for many workholding applications
- Pull Down gripping action for optimal accuracy & length control
- Seating detection system as option to ensure correct part location.
- Low maintenance
Kitagawa-NorthTech power wing work grippers are manufactured from high grade alloy steel. All guide surfaces are hardened and ground to assure consistent accuracy and performance.
Standard Equipment: Chuck assembled with adapter, chuck mounting bolts, soft top jaws, T-nuts and jaw mounting bolts with wrench, draw nut wrench.
SPECIFICATIONS
| MODEL | UNIT | PWS06 |
| Plunger Stroke | in. | 0.437 |
| Jaw Stroke (Diameter) | in. | 0.303 |
| Gripping Force – Pneumatic at 0.6MPa(6kgf/cm2) | kN (kgf) | 19(1937) |
| Gripping Force – Hydraulic at 1.3MPa(13kgf/cm2) | kN (kgf) | 53(5404) |
| Maximum Working Pressure Mpa(kgf/cm2) – Pneumatic |  0.7(7) | |
| Maximum Working Pressure Mpa(kgf/cm2) – Hydraulic |  1.3(13) | |
| Maximum Allowable Pressure Mpa(kgf/cm2) | 0.2(2) | |
|  Gripping Range – External Diameter | in. | ø0.05 – 4.724 |
|  Gripping Range – Internal Diameter | in. | ø2.755 – 5.984 |
| Â Weight | lbs. | 52 |
DIMENSIONS (DIMENSIONS IN INCHES)
