DM100・DME100
Wire EDM dedicated NC rotary table
Waterproof and rust-prevention
DM100・DME100
- Reliable performance even in water
- Lightweight & compact
- Stainless steel construction and special seal prevent rust and ensure waterproofing.
- High accuracy & high performance
- Built-in current collector allows maintenance free
- Vertical use only
- Patented in Japan (No. 4354773)
*CE correspondence
Product Specifications
| Model | DM100 | DME100 | |
|---|---|---|---|
| Table Diameter (mm) | ø100 | ø100 | |
| Centre Hole Diameter (mm) | ø45H7 | ø45H7 | |
| Through Hole Diameter (mm) | ø40 | ø26 / ø36 | |
| Centre Height (mm) | 65 | 65 | |
| Motor Axix Reduced Inertia (kg･m2) | 0.000054 | 0.000054 | |
| Servomotor (for Fanuc spec.) | βM 0.5/4000 / βiS 0.5/6000 | βM 0.5/4000 / βiS 0.5/6000 | |
| Total Reduction Ratio | 1/120 | 1/120 | |
| Max. Rotation Speed (min-1) | 4th axis spec. (Fanuc spec.) | 3.0 (at motor 360min-1) | 3.0 (at motor 360min-1) |
| M signal spec. | 3.0 (at motor 360min-1) | - | |
| Min. Rotation Speed (min-1) | 4th axis spec. (Fanuc spec.) | 0.00275 (at motor 0.33min-1) | 0.00275 (at motor 0.33min-1) |
| M signal spec. | 0.03 (at motor 3.6min-1) | - | |
| Allowable Work Inertia (kg･m2) | 0.025 | 0.025 | |
| Indexing Accuracy (sec) | 30 | 16 | |
| Repeatability (sec) | 5 | 4 | |
| Mass of Product (kg) | 20 | 25 | |
| Allowable Electrode Current (A) | 20 | 20 | |
| Protection Class | IP68 (submerged 0.5m) However,piping opening part is excluded. | IP68 (submerged 0.5m) However,piping opening part is excluded. | |
| Allowable Load | Vertical (kg) | 20 | 20 |
| Manual Tailstock (as an option) | DM100RN01 | DM100RN01 | |
| Outline Drawing | 2D |  | |
 | | ||
 | | ||
 | | ||
| 3D |  | | |
 | | ||
