TM series
Multiple-spindle type
High productivity
TM series
- Multi spindle range for multiple work piece machining reduces set up time and increase productivity.
- Mono-block body & compact design
- Ideal for tapping machines with high speed rotation
- Tact time reduced
- Multi work pieces machining
*CE correspondence
Product Specifications
| Model | TM2100 | TM3100 | TM2160 | TM3160 | ||
|---|---|---|---|---|---|---|
| Right-handed Type | â—‹ | â—‹ | â—‹ | â—‹ | ||
| Left-handed Type | â—‹ | â—‹ | â—‹ | â—‹ | ||
| Table Diameter (mm) | ø105 | ø105 | ø165 | ø165 | ||
| Centre Hole Diameter (mm) | ø50H7 | ø50H7 | ø50H7 | ø50H7 | ||
| Through Hole Diameter (mm) | ø32 | ø32 | ø40 | ø40 | ||
| Centre Height (mm) | 110 | 110 | 140 | 140 | ||
| Clamping Method | Pneumatic | Pneumatic | Pneumatic/Air-hydraulic /Hydraulic | Pneumatic/Air-hydraulic /Hydraulic | ||
| Clamping Torque (Nï½¥m) | at pneumatic 0.5MPa | 117 | 117 | 176 | 176 | |
| at air-hydraulic booster 0.45MPa /hydraulic 3.5MPa) | - | - | 400 | 400 | ||
| Motor Axis Reduced Inertia (kgï½¥m2) | 0.000353 | 0.000475 | 0.000145 | 0.000188 | ||
| Servomotor (for Fanuc spec.) | αiF 4/5000-B | αiF 4/5000-B | αiF 4/5000-B | αiF 4/5000-B | ||
| Total Reduction Ratio | 4th axis spec. (Fanuc spec.) | 1/36 | 1/36 | 1/90 | 1/90 | |
| M signal spec. | 1/36 | 1/60 | 1/90 | 1/120 | ||
| Max. Rotation Speed (min-1) | 4th axis spec. (Fanuc spec.) | 83.3 (at motor 3000min-1) | 69.4 (at motor 2500min-1) | 33.3 (at motor 3000min-1) | 33.3 (at motor 3000min-1) | |
| M signal spec. | 83.3 (at motor 3000min-1) | 50 (at motor 3000min-1) | 33.3 (at motor 3000min-1) | 16.6 (at motor 2000min-1) | ||
| Allowable Work Inertia (kgï½¥m2) | 0.054 | 0.054 | 0.51 | 0.51 | ||
| Indexing Accuracy (sec) | 60 | 60 | 30 | 30 | ||
| Repeatability (sec) | 5 | 5 | 4 | 4 | ||
| Mass of Product (kg) | 85 | 100 | 100 | 150 | ||
| Allowable Load | Horizontal (kg) | 60 | 60 | 160 | 160 | |
| Vertical (kg) | 30 | 30 | 80 | 80 | ||
| Manual Tailstock (as an option) | TS2100RN | TS3100RN | TS2160RN | TS3160RN | ||
| Outline Drawing | Kitagawa own controller spec. | 2D |  | | | |
 | | | | |||
 | | | | |||
 | | | | |||
| 3D |  | | | | ||
 | | | | |||
| 4th axis spec. (Fanuc spec.) | 3D | | | | | |
| | | | |||
