MX160

High speed NC rotary table

Max. spindle speed increased to 75 min-1 reduced tact time and improved productivity.
Indexing time reduced by 39% (with KITAGAWA own controller)
Mounting dimensions equivalent to MR series
Built-in rotary joint available

*CE correspondence

Model			MX160
Right-handed type			×
Left-handed type			○
Table Diameter (mm)			ø165
Centre Hole Diameter (mm)			ø50H7
Through Hole Diameter (mm)			ø40
Centre Height (mm)			140
Clamping Method			Pneumatic
Clamping Torque (N･m) (at 0.5 MPa)			310
Motor Axis Reduced Inertia (kg･m²)			0.00023
Servomotor (for Sanyo spec.)			R2AA08075FXPGPM6
Total Reduction Ratio			1/40
Max. Rotation Speed (min^-1)			75 (at motor 3000min^-1)
Allowable Work Inertia (kg･m²)			0.25
Indexing Accuracy (sec)			40
Repeatability (sec)			8
Mass of Product (kg)			43
Allowable Load		<!-- -->Horizontal (kg)	80
Allowable Load		<!-- -->Vertical (kg)	40
Manual Tailstock (as an option)			MR160RN
Tail Spindle (as an option)			MSR142A/TSR142A
Rotary Joint (as an option)			RJ40H16P01 Hydraulic/Pneumatic 4 ports
Outline Drawing	Kitagawa Own Controller Spec.	2D



		3D
		3D
	4th axis spec. (Sanyo spec.)	3D
	4th axis spec. (Sanyo spec.)	3D
Option Outline Drawing			Tailstock \| Tail Spindle