TT series
Tilting NC rotary table
For 5 axis machining
TT series
- Enables 5-axis 5-fsce machining
- Compact design
*CE correspondence
* Since 2 additional axis controlled NC rotary tables fall under the list controlled items of Export Trade Control Ordinance of Japan, Permission for Export by the Ministry of Economy, Trade and Industry is required before exporting from Japan.
Product Specifications
| Model | TT101 | TW120 | ||
|---|---|---|---|---|
| Tilting Angle Range | -20°～+120° | -20°～+110° | ||
| Table Diameter (mm) | ø110 | ø125 | ||
| Centre Hole Diameter (mm) | ø50H7 | ø60H7 | ||
| Through Hole Diameter (mm) | ø32 | ø32 | ||
| Centre Height (mm) | 140 | 150 | ||
| Clamping Method | Pneumatic | Pneumatic | ||
| Clamping Torque (N･m) (at 0.5 MPa) | Rotating axis | 180 | 120 | |
| Tilting axis | 300 | 200 | ||
| Motor Axis Reduced Inertia (kg･m2) | Rotating axis | 0.000082 | 0.000072 | |
| Tilting axis | 0.000081 | 0.000034 | ||
| Servomotor (for Fanuc spec.) | Rotating axis | αiF 1/5000-B | αiF 2/5000-B | |
| Tilting axis | αiF 2/5000-B | αiF 2/5000-B | ||
| Total Reduction Ratio | Rotating axis | 1/72 | 1/90 | |
| Tilting axis | 1/120 | 1/180 | ||
| Max. Rotation Speed (min-1) | Rotating axis (at motor 3000 min-1) | 41.6 | 33.3 | |
| Tilting axis (at motor 3000 min-1) | 25 | 16.6 | ||
| Allowable Work Inertia (kg･m2) | 0.05 | 0.06 | ||
| Indexing Accuracy (sec) | Rotating axis | 30 | 30 | |
| Tilting axis | 60 | 60 | ||
| Repeatability (sec) | 4 | 4 | ||
| Mass of Product (kg) | 73 | 105 | ||
| Allowable Load | at horizontal (kg) | 35 | 35 | |
| at tilted (kg) | 20 | 20 | ||
| Built-in Rotary Joint (as an option) | RJ32-10T05 Hydraulic/Pneumatic 3 ports | RJ32-12T08 Hydraulic/Pneumatic 3 ports | ||
| Outline Drawing | Kitagawa own controller spec. | 2D |  | |
 | | |||
 | | |||
 | | |||
| 3D |  | - | ||
 | - | |||
| 5th axis spec. (Fanuc spec.) | 3D | | - | |
| | - | |||
| Model | TT140 | TT150 | ||
|---|---|---|---|---|
| Tilting Angle Range | -110°～+110° | -20°～+110° | ||
| Table Diameter (mm) | ø140 | ø150 | ||
| Centre Hole Diameter (mm) | ø60H7 | ø60H7 | ||
| Through Hole Diameter (mm) | ø32 | ø40 | ||
| Centre Height (mm) | 200 | 150 | ||
| Clamping Method | 空圧 | 空圧 | ||
| Clamping Torque (N･m) (at 0.5 MPa) | Rotating axis | 280 | 350 | |
| Tilting axis | 500 | 550 | ||
| Motor Axis Reduced Inertia (kg･m2) | Rotating axis | 0.000269 | 0.000242 | |
| Tilting axis | 0.000288 | 0.000132 | ||
| Servomotor (for Fanuc spec.) | αiF 2/5000-B | αiF 2/5000-B | ||
| Total Reduction Ratio | Rotating axis | 1/72 | 1/72 | |
| Tilting axis | 1/180 | 1/180 | ||
| Max. Rotation Speed (min-1 | Rotating axis (at motor 3000min-1) | 41.6 | 41.6 | |
| Tilting axis (at motor 3000min-1) | 16.6 | 16.6 | ||
| Allowable Work Inertia (kg･m2) | 0.12 | 0.14 | ||
| Indexing Accuracy (sec) | Rotating axis | 30 | 30 | |
| Tilting axis | 60 | 60 | ||
| Repeatability (sec) | 4 | 4 | ||
| Mass of Product (kg) | 158 | 141 | ||
| Allowable Load | at horizontal (kg) | 50 | 50 | |
| at tilted (kg) | 30 | 30 | ||
| Built-in Rotary Joint (as an option) | RJ32TT140 Hydraulic/Pneumatic 4 ports | RJ40FTT150 Hydraulic/Pneumatic 4 ports + Pneumatic exclusive 1 port | ||
| Outline Drawing | Kitagawa own controller spec. | 2D | | |
| | |||
| | |||
| | |||
| 3D (standard) | | | ||
| | | |||
| 3D (with rotary joint) | | | ||
| | | |||
| 5th axis spec. (Fanuc spec.) | 3D (standard) | | | |
| | | |||
| 3D (with rotary joint) | | | ||
| | | |||
| Model | TT182/TW182 | TT200 | ||
|---|---|---|---|---|
| Tilting Angle Range | -35°～+110° | -35°～+110° | ||
| Table Diameter (mm) | ø180 | ø200 | ||
| Centre Hole Diameter (mm) | ø65H7 | ø65H7 | ||
| Through Hole Diameter (mm) | ø40 | ø40 | ||
| Centre Height (mm) | 180 | 180 | ||
| Clamping Method | Air-hydraulic / Hydraulic | Air-hydraulic / Hydraulic | ||
| Clamping Torque (N･m) (at pneumatic 0.5MPa /hydraulic 3.5MPa) | Rotating axis | 450 | 600 | |
| Tilting axis | 800 | 1200 | ||
| Motor Axis Reduced Inertia (kg･m2) | Rotating axis | 0.000242 | 0.000225 | |
| Tilting axis | 0.000135 | 0.000125 | ||
| Servomotor (for Fanuc spec.) | αiF 2/5000-B | αiF 2/5000-B | ||
| Total Reducion Ratio | Rotating axis | 1/90 | 1/90 | |
| Tilting axis | 1/180 | 1/180 | ||
| Max. Rotation Speed (min-1) | Rotating axis (at motor 3000min-1) | 33.3 | 33.3 | |
| Tilting axis (at motor 3000min-1) | 16.6 | 16.6 | ||
| Allowable Work Inertia (kg･m2) | 0.25 | 0.3 | ||
| Indexing Accuracy (sec) | Rotating axis | 20 | 20 | |
| Tilting axis | 60 | 60 | ||
| Repeatability (sec) | 4 | 4 | ||
| Mass of Product (kg) | 163 / 178 | 170 | ||
| Allowable Load | at horizontal (kg) | 60 | 60 | |
| at tilted (kg) | 40 | 40 | ||
| Built-in Rotary Joint (as an option) | RJ40FTT182 Hydraulic/Pneumatic 4 ports +Pneumatic exclusive 1 port | RJ40FTT200 Hydraulic/Pneumatic 4 ports +Pneumatic exclusive 1 port | ||
| Pneumatic Outer Cylinder (as an option) | NY1312T18B | NY1312T18B | ||
| Hydraulic Outer Cylinder (as an option) | NY0912T18A | NY0912T18A | ||
| Outline Drawing | Kitagawa own controller spec. | 2D | | |
| | |||
| | |||
| | |||
| 3D (standard) | TT182BV | | ||
| TT182BV | | |||
| 3D (with rotary joint) | TT182BVR | | ||
| TT182BVR | | |||
| 5th axis spec. (Fanuc spec.) | 3D (standard) | TT182BF | | |
| TT182BF | | |||
| 3D (with rotary joint) | TT182BFR | | ||
| TT182BFR | | |||
| Model | TT251/TW251 | TT321/TW321 | ||
|---|---|---|---|---|
| Tilting Angle Range | -35°～+110° | -35°～+110° | ||
| Table Diameter (mm) | ø250 | ø320 | ||
| Centre Hole Diameter (mm) | ø100H7 | ø135H7 | ||
| Through Hole Diameter (mm) | ø70 | ø110 | ||
| Centre Height (mm) | 225 | 255 | ||
| Clamping Method | Air-hydraulic / Hydraulic | Air-hydraulic / Hydraulic | ||
| Clamping Torque (N･m) (at pneumatic 0.45MPa /hydraulic 3.5MPa) | Rotating axis | 900 | 2600 | |
| Tilting axis | 1200 | 2600 | ||
| Motor Axis Reduced Inertia (kg･m2) | Rotating axis | 0.00070 | 0.00083 | |
| Tilting axis | 0.00054 | 0.00046 | ||
| Servomotor (for Fanuc spec.) | αiF 4/5000-B | αiF 8/3000-B | ||
| Total Reduction Ratio | 4th axis spec. (Fanuc spec.) | Rotating axis | 1/90 | 1/120 |
| Tilting axis | 1/180 | 1/360 | ||
| M signal spec. | Rotating axis | 1/90 | 1/180 | |
| Tilting axis | 1/180 | 1/360 | ||
| Max. Rotation Speed (min-1) | 4th axis spec. (Fanuc spec.) | Rotating axis (at motor 3000 min-1) | 33.3 | 25 |
| Tilting axis (at motor3000min-1) | 16.6 | 8.3 | ||
| M signal spec. | Rotating axis (at motor 3000 min-1) | 33.3 | 16.6 | |
| Tilting axis (at motor 3000min-1) | 16.6 | 8.3 | ||
| Allowable Work Inertia (kg･m2) | 0.78 | 1.92 | ||
| Indexing Accuracy (sec) | Rotating axis | 20 | 20 | |
| Tilting axis | 45 | 45 | ||
| Repeatability (sec) | 4 | 4 | ||
| Mass of Product (kg) | 260 / 270 | 350 / 360 | ||
| Allowable Load | at hotizontal (kg) | 100 | 150 | |
| at tilted (kg) | 60 | 100 | ||
| Rotary Joint (as an option) | RJ70H25T02 Hydraulic/Pneumatic 6 ports | RJ70H32T03 Hydraulic/Pneumatic 6 ports | ||
| Outline Drawing | Kitagawa own controller spec. | 2D | | |
| | |||
| | |||
| | |||
| 3D | TT251HV | TT321HV | ||
| TT251HV | TT321HV | |||
| 5th axis spec. (Fanuc spec.) | 3D | TT251HFF | TT321HFF | |
| TT251HFF | TT321HFF | |||
