TR series
Side motor type (vertical mounting)
TR series
- High performance range for machining large work pieces
- High rigidity for heavy cutting
- Hydraulic clamping method
- High accuracy
- Air-hydraulic booster provides high clamping torque. (TRX and TLX)
- Rotary joint available
- Large through-hole
- Rotary scale can be fitted to further increase accuracy
*CE correspondence
Product Specifications
| Model | TLX250 | TRX320(TLX) | TR400(TL) | ||
|---|---|---|---|---|---|
| Right-handed Type | × | ○ | ○ | ||
| Left-handed Type | ○ | ○ | ○ | ||
| Table Diameter (mm) | ø250 | ø320 | ø400 | ||
| Centre Hole Diameter (mm) | ø105H7 | ø135H7 | ø180H7 | ||
| Through Hole Diameter (mm) | ø78 | ø110 | ø150 | ||
| Centre Height (mm) | 180 | 225 | 255 | ||
| Clamping Method | Air-Hydraulic / Hydraulic | Air-Hydraulic / Hydraulic | Air-Hydraulic / Hydraulic | ||
| Clamping Torque (N・m) (at pneumatic TRX-0.5MPa, TR-0.45MPa, hydraulic 3.5MPa) | 1100 | 2600 | 2500 | ||
| Motor Axis Reduced Inertia (kg・m2) | 0.00073 | 0.00085 | 0.0028 | ||
| Servomotor (for Fanuc spec.) | αiF 4/5000-B | αiF 8/3000-B | αiF 12/4000-B | ||
| Total Reduction Ratio | 4th axis spec. (Fanuc spec.) | 1/90 | 1/120 | 1/180 | |
| M signal spec. | 1/90 | 1/180 | 1/180 | ||
| Max. Rotation Speed (min-1) | 4th axis spec. (Fanuc spec.) | 33.3 (at motor 3000min-1) | 25 (at motor 3000min-1) | 11.1 (at motor 2000min-1) | |
| M signal spec. | 33.3 (at motor 3000min-1) | 16.6 (at motor 3000min-1) | 11.1 (at motor 2000min-1) | ||
| Allowable Work Inertia (kg・m2) | 1.95 | 4.48 | 10.00 | ||
| Indexing Accuracy (sec) | 20 | 20 | 20 | ||
| Repeatability (sec) | 4 | 4 | 4 | ||
| Mass of Product (kg) | 142 | 181 | 350 | ||
| Allowable Load | Horizontal (kg) | 250 | 350 | 500 | |
| Vertical (kg) | 125 | 180 | 250 | ||
| Manual Tailstock （Option） | TS250RN | TS320RN | TS400RN | ||
| Tail Spindle （Option） | MSR181A/TSR181A TSR181H | TSR181A45 TSR181H45 | Order Production | ||
| Rotary Joint （Option） | RJ70H25D05 Hydraulix / Pneumatic 6 ports | RJ70H32K02 Hydraulix / Pneumatic 6 ports | Order Production | ||
| Outline Drawing | Kitagawa own controller spec. | 2D | - |  | - |
| - |  | - | |||
| - |  | - | |||
| - |  | - | |||
| 3D |  | | | ||
 | | | |||
| 4th axis spec. (Fanuc spec.) | 3D | | | | |
| | | |||
| Option Outline Drawing | Tailstock | Tail Spindle | ||||
| Model | TR500(TL) | TR630 | ||
|---|---|---|---|---|
| Right-handed Type | ○ | ○ | ||
| Left-handed Type | ○ | × | ||
| Table Diameter (mm) | ø500 | ø630 | ||
| Centre Hole Diameter (mm) | ø200H7 | ø280H7 | ||
| Through Hole Diameter (mm) | ø170 | ø250 | ||
| Centre Height (mm) | 310 | 400 | ||
| Clamping Method | Air-Hydraulic / Hydraulic | Air-Hydraulic / Hydraulic | ||
| Clamping Torque (N・m) (at pneumatic 0.45MPa, hydraulic 3.5MPa) | 3200 | 4000 | ||
| Motor Axis Reduced Inertia (kg・m2) | 0.0028 | 0.0064 | ||
| Total Reduction Ratio | 4th axis spec. (Fanuc spec.) | 1/180 | 1/180 | |
| M signal spec. | 1/180 | 1/180 | ||
| Max. Rotation Speed (min-1) | 4th axis spec. (Fanuc spec.) | 11.1 (at motor 2000min-1) | 11.1 (at motor 2000min-1) | |
| M signal spec. | 11.1 (at motor 2000min-1) | 8.3 (at motor 1500min-1) | ||
| Allowable Work Inertia (kg・m2) | 18.73 | 49.62 | ||
| Indexing Accuracy (sec) | 20 | 20 | ||
| Repeatability (sec) | 4 | 4 | ||
| Mass of Product (kg) | 550 | 900 | ||
| Allowable Load | Horizontal (kg) | 600 | 1000 | |
| Vertical (kg) | 300 | 400 | ||
| Manual Tailstock （Option） | TS500RN | TS630RN | ||
| Tail Spindle （Option） | Order Production | Order Production | ||
| Rotary Joint （Option） | Order Production | Order Production | ||
| Outline Drawing | Kitagawa own controller spec. | 2D | - | - |
| - | - | |||
| - | - | |||
| - | - | |||
| 3D | | - | ||
| - | |||
| 4th axis spec. (Fanuc spec.) | 3D | | | |
| | |||
| Option Outline Drawing | Tailstock | Tail Spindle | |||
